Glossary entry (derived from question below)
Spanish term or phrase:
Entallado
English translation:
Notching / Grooving
Added to glossary by
Carlos Ruestes
Aug 8, 2006 07:41
17 yrs ago
1 viewer *
Spanish term
Entallado
Spanish to English
Tech/Engineering
Energy / Power Generation
pressure vessels
Entallado del agrietamiento hasta su eliminación total
This is an annexe to a report on reboiler weld cracks wich includes the calculations of the cracking
This is an annexe to a report on reboiler weld cracks wich includes the calculations of the cracking
Proposed translations
(English)
| 4 +1 | Notching / Grooving |
Carlos Ruestes
|
| 5 | grind out |
bigedsenior
|
| 3 | sealing |
cw010 (X)
|
Proposed translations
+1
3 hrs
Carlos Ruestes
Argentina
Argentina
Native in Spanish
Specializes in field
Argentina
Aeronautics Engineer - Technical Trans.
Native in: Spanish
Works in: English to Spanish, Spanish to English
Related KudoZ points
:
25
Selected
Notching / Grooving
See Routledge Tech. Dict.
Metal Working Tools - Welding Supplies – HTP America, Inc. - [ Traduzca esta página ]The notching tool puts a 45ƒ lip in the edge of the panels to be welded together. This lip reinforces the panel and helps to resist warpage when welding. ...
www.htpweld.com/products/metal_working_tools/index.htm - 21k -
Otra posibilidad es grooving. Se utiliza bastante en manuales de aviación, para indicar que la rajadura debe ser "abierta" para su posterior rellenado con soldadura.
Sincol Commercial Sheet Vinyl Installation - [ Traduzca esta página ]Groove the seams using a mechanical or hand grower to accept a 3 mm welding rod. Be sure to center the groove on the seam so that both sides are equally ...
sincolofamerica.com/Com-Sheet-Vinyl-Install.html - 25k - En caché - Páginas similares
Welding of joints - Tarkett Commercial - [ Traduzca esta página ]The groove must be cut with a “U” shaped cutter to ensure the best possible contact between the weld rod and the covering (this can be achieved with an ...
www.tarkett-commercial.com/floors/site/en-fr/topic/inst_joi... - 45k -
Metal Working Tools - Welding Supplies – HTP America, Inc. - [ Traduzca esta página ]The notching tool puts a 45ƒ lip in the edge of the panels to be welded together. This lip reinforces the panel and helps to resist warpage when welding. ...
www.htpweld.com/products/metal_working_tools/index.htm - 21k -
Otra posibilidad es grooving. Se utiliza bastante en manuales de aviación, para indicar que la rajadura debe ser "abierta" para su posterior rellenado con soldadura.
Sincol Commercial Sheet Vinyl Installation - [ Traduzca esta página ]Groove the seams using a mechanical or hand grower to accept a 3 mm welding rod. Be sure to center the groove on the seam so that both sides are equally ...
sincolofamerica.com/Com-Sheet-Vinyl-Install.html - 25k - En caché - Páginas similares
Welding of joints - Tarkett Commercial - [ Traduzca esta página ]The groove must be cut with a “U” shaped cutter to ensure the best possible contact between the weld rod and the covering (this can be achieved with an ...
www.tarkett-commercial.com/floors/site/en-fr/topic/inst_joi... - 45k -
4 KudoZ points awarded for this answer.
Comment: "Thanks very much
"
24 mins
sealing
.
9 hrs
grind out
...cracks are self propagating and have to be eliminated, which is done by grinding away the area immediate to the crack until the crack is no longer visible... then the area is reinforced with another weld pass..
Grooving or notching, as suggested in the other answers, would create stress risers, which could lead to sudden failure.
--------------------------------------------------
Note added at 9 hrs (2006-08-08 17:18:51 GMT)
--------------------------------------------------
Correction-
Grooving or notching Without refilling the area,........
Grind out crack and blow out all weld debris. 4. Visually inspect the ground out area to assure the crack has been fully removed. 5. Re-weld the ground out ...
www.bechteljacobs.com/info/product_alert/skyjack_60.pdf
Gouge or grind out crack. Confirm crack removal – MPI or DPI. Grind or burr to sufficient ... A general work instruction is given for welding on crane rail. ...
www.wtia.com.au/pdf/TGN-BC-05 Repair Welding of Crane Rails... - Similar pages
Procedures: Aluminum WeldingTo repair cracked castings, drill a hole at each end of the crack to prevent it spreading further and grind out to the bottom. Begin welding at the drilled ...
www.brazing.com/techguide/procedures/cast_iron.asp
Grooving or notching, as suggested in the other answers, would create stress risers, which could lead to sudden failure.
--------------------------------------------------
Note added at 9 hrs (2006-08-08 17:18:51 GMT)
--------------------------------------------------
Correction-
Grooving or notching Without refilling the area,........
Grind out crack and blow out all weld debris. 4. Visually inspect the ground out area to assure the crack has been fully removed. 5. Re-weld the ground out ...
www.bechteljacobs.com/info/product_alert/skyjack_60.pdf
Gouge or grind out crack. Confirm crack removal – MPI or DPI. Grind or burr to sufficient ... A general work instruction is given for welding on crane rail. ...
www.wtia.com.au/pdf/TGN-BC-05 Repair Welding of Crane Rails... - Similar pages
Procedures: Aluminum WeldingTo repair cracked castings, drill a hole at each end of the crack to prevent it spreading further and grind out to the bottom. Begin welding at the drilled ...
www.brazing.com/techguide/procedures/cast_iron.asp
Something went wrong...