Glossary entry (derived from question below)
German term or phrase:
Revisionsschalter
English translation:
override switch
Added to glossary by
John Kinory (X)
May 22, 2002 10:59
21 yrs ago
6 viewers *
German term
Revisionsschalter
German to English
Tech/Engineering
Electronics / Elect Eng
Electronics
Very little - list of electronic items.
I think it's an override switch, but could be reset (or maybe refresh) switch.
I think it's an override switch, but could be reset (or maybe refresh) switch.
Proposed translations
(English)
4 +1 | safety switch | Beth Kantus |
4 +2 | inspection switch | Cilian O'Tuama |
4 | controle switch | Sigrid Lensink-Damen |
2 +1 | no solution... | Steffen Walter |
Proposed translations
+1
1 hr
Selected
safety switch
HTH!
PDF] Liste der CE-Dokumente für Kunden
File Format: PDF/Adobe Acrobat - View as HTML
... 01.09.2000 Schmitter, G. CE93-9.d, Der Sicherheitsschalter (Revisionsschalter) Schutz-
einrichtung gegen unerwar- teten Anlauf Elektrische und elektronische ...
wwwitsp1.suva.ch/sap/its/mimes/ zww20/99/pdf/CE97-2-d.pdf
[PDF] EMPFEHLUNG MSRL-Technik
File Format: PDF/Adobe Acrobat - View as HTML
... 19 4.5 Sicherheitsschalter (früher auch Revisionsschalter genannt)....20
5. Funktionalität ...
www.kbob.ch/pdf/d_e_msrl.pdf
PDF] Liste der CE-Dokumente für Kunden
File Format: PDF/Adobe Acrobat - View as HTML
... 01.09.2000 Schmitter, G. CE93-9.d, Der Sicherheitsschalter (Revisionsschalter) Schutz-
einrichtung gegen unerwar- teten Anlauf Elektrische und elektronische ...
wwwitsp1.suva.ch/sap/its/mimes/ zww20/99/pdf/CE97-2-d.pdf
[PDF] EMPFEHLUNG MSRL-Technik
File Format: PDF/Adobe Acrobat - View as HTML
... 19 4.5 Sicherheitsschalter (früher auch Revisionsschalter genannt)....20
5. Funktionalität ...
www.kbob.ch/pdf/d_e_msrl.pdf
2 KudoZ points awarded for this answer.
Comment: "I'll give you the points, even though all the answers are helpful in themselves but I don't think any are completely correct. Safety, however, is a wide enough term so maybe it's the best option."
+1
10 mins
no solution...
... but just an idea:
I think you know that "Revision" is frequently used in German techspeak to denote equipment parts used for inspections/routine maintenance to be regularly performed on a wide range of technical installations (such as "Revisionsklappe" or "Revisionsöffnung"). So the "Revisionsschalter" might be a switch to EITHER completely turn off/isolate the equipment in order to enable inspection by a specialist OR to turn to a specific inspection mode.
HTH
Steffen
I think you know that "Revision" is frequently used in German techspeak to denote equipment parts used for inspections/routine maintenance to be regularly performed on a wide range of technical installations (such as "Revisionsklappe" or "Revisionsöffnung"). So the "Revisionsschalter" might be a switch to EITHER completely turn off/isolate the equipment in order to enable inspection by a specialist OR to turn to a specific inspection mode.
HTH
Steffen
13 mins
controle switch
Well, Revision means among other things controle. So I think it is a controle-like switch. Maybe override swich as you proposed yourself would be better.
Just to help.
Best regards
Sigrid Damen
Just to help.
Best regards
Sigrid Damen
Reference:
+2
1 hr
inspection switch
perhaps a safe bet.
E.g.
All system controls are located on the front panel. The system sequence is controlled by a PLC processor. Start, Stop, Continue, and Emergency Stop buttons are located on the front panel. A digital programmable timer controls the aluminum strip time. An INSPECTION SWITCH allows the operator to suspend the cleaning process and lift parts out of the process tank. This enables the operator to view the cleaning progress of the parts through the front door.
http://www.soleras.com/solo1/operate2.htm
E.g.
All system controls are located on the front panel. The system sequence is controlled by a PLC processor. Start, Stop, Continue, and Emergency Stop buttons are located on the front panel. A digital programmable timer controls the aluminum strip time. An INSPECTION SWITCH allows the operator to suspend the cleaning process and lift parts out of the process tank. This enables the operator to view the cleaning progress of the parts through the front door.
http://www.soleras.com/solo1/operate2.htm
Peer comment(s):
agree |
Endre Both
: Particularly as Revisionsschalter can have very different effects from one machine to another.
5 hrs
|
agree |
Steffen Walter
18 hrs
|
Something went wrong...